Pakistan PTA Approval
Introduction：
What is PTA certification?
According to the 1996 Telecommunications Act (Article 29), no terminal equipment can be directly or indirectly connected to the public switching network unless the type is approved by the PTA. General sales, suitable for connection with specific public telecommunication networks.
Products We Test
Involving ‘wireless wifi products, bluetooth products, telecommunications equipment, mobile phones, telephones, wireless monitoring equipment’, etc.
ISM frequency band, used for WLAN, Bluetooth, etc.
• The ISM frequency band of wireless devices that allow interference-free operation is 2.4-2.5 GHz,
Provides up to 30dBm output power in the range of 5.725-5.850 GHz.
• The Industrial Science and Medical (ISM) frequency band including 2.4-2.5 GHz and 5.725-5.875 GHz may be
Free to use by CVAS data and local circulation, based on the following:
Power limit
ISM frequency band, used for WLAN, Bluetooth, etc.
• The ISM frequency band of wireless devices that allow interference-free operation is 2.4-2.5 GHz,
Provides up to 30dBm output power in the range of 5.725-5.850 GHz.
• The Industrial Science and Medical (ISM) frequency band including 2.4-2.5 GHz and 5.725-5.875 GHz may be
Free to use by CVAS data and local circulation, based on the following:
Power limit
ISM frequency band, used for WLAN, Bluetooth, etc.
• The ISM frequency band of wireless devices that allow interference-free operation is 2.4-2.5 GHz,
Provides up to 30dBm output power in the range of 5.725-5.850 GHz.
• The Industrial Science and Medical (ISM) frequency band including 2.4-2.5 GHz and 5.725-5.875 GHz may be
Free to use by CVAS data and local circulation, based on the following:
Power limit
2. ISM frequency band, used for WLAN, Bluetooth, etc.
• The ISM frequency band of wireless devices that allow interference-free operation is 2.4-2.5 GHz,
Provides up to 30dBm output power in the range of 5.725-5.850 GHz.
• The Industrial Science and Medical (ISM) frequency band including 2.4-2.5 GHz and 5.725-5.875 GHz may be
Free to use by CVAS data and local circulation, based on the following:
Power limit
• Commercial/non-commercial (public/private) use to establish Wi-Fi hotspots. The maximum EIRP is
Each of the following frequency bands is 30 dBm: ØCommercial/non-commercial (public/private) use, for
Establish Wi-Fi hotspots. The maximum EIRP for each of the following frequency bands is 30 dBm:
• 2.4-2.5 GHz
• 5.725-5.875 GHz
Standards We Test To
1. PTA certification test report standards:
It is stipulated that if the Authority has not specified any technical standard equipment for a certain terminal, the technical standards established by the following standardization bodies can be used:
a. One kind. ITU Telecommunication Standardization Sector (ITU-T).
b. European standard (EN).
C. International Electrotechnical Commission (IEC) and its international organizations
Special Committee on Radio Interference (CISPR).
d. In the European Commission for Electrotechnical Standardization (CENELEC).
e. In the European Telecommunications Standards Institute (ETSI).
F. Occupational Health and Safety Assessment Specification (OHSAS).
G. International Organization for Standardization (ISO)
H. Radio Equipment Directive (RED) Directive 2014/53/EU
(2) Supervision can approve test reports issued by officially recognized world-renowned laboratories
Approved by the accreditation committee of the country of origin.
(3) All terminal equipment must also meet the following basic requirements and standards:
follow:
A sort of. interoperability
b. Valid International Mobile Equipment Identity
C. Safety requirements, ie mobile/handheld devices must meet specific absorption standards
When exposed to radio frequency (RF), the tissue rate (SAR) limit is 2 watts per kilogram of tissue (over 10 grams on average)
Electromagnetic field.
Why Choose Us?
HTW Lab, accredited by CNAS, CMA, CNCA & A2LA, consistently operates competently and generates accurate and valid results in accordance with ISO/IEC 17025. We are also IECEE CB Scheme Test Laboratory (CBTL). Thus, testing reports from HTW Lab can be accepted between countries.
Your Benefits At A Glance:
1.20 Years Of Experience
HTW has extensive experience in all types of devices and regulatory requirements across markets.
2.Provide Free Modification Service Program
Together with our wealth of knowledge in complex regulations globally, HTW provides a complete suite of testing solutions according to your needs including free Modification service.
3.Save time to global markets
With over 7,000 square meters of labs, HTW offers the best testing cycles and you don't have to wait in line, HTW offers 1-on-1 service.With our in-depth insight of global product quality and regulatory requirements, HTW can optimize your costs and minimize your time to market.
4.Complete qualifications
ISO/IEC 17025 lab, accreditated by CNAS, CMA,A2LA,GLP.
5.Competitve price
located in China ,Testing costs are lower than other labs.
We're Here for You
We're based in China but regularly work with clients globally. We will get back to you in 1 working day.
Our Business Hours:
8.30am - 5.00pm in CST (UTC/GMT+08:00) Monday - Friday
Email:
Looking forward to receiving your email !
HTW Testing and Certification Solutions.
1. Provide us with product pictures, product brochures/manuals
2. Determine your needs（test report purpose/ test itmes/ standards）
3. Receive the testing/compliance service proposal and quotation
4. Sign contract and make payment
5.Send samples (please contact us for address info.)
6.Informed project opening and test TAT(turn around time) via email
7.Testing
8.Draft report for your confirmation
9. Formal reports endorsed by ILAC - CNAS (electronic version)
10.Sample Discard or Return